The spring-y buttondown — stripe engineering

Things are progressing nicely on the spring-y shirt.  Cutting out the various pieces takes some thought and a fair amount of care, especially when working with stripes.  It took me awhile to wrap my head around the whole front placket matching, so hopefully this post can help some of you who may be contemplating a striped shirt.  

Here goes….






To make the stripes evenly spaced across the front of the shirt a dominant stripe of the fabric is “stacked” on three parts of the shirt (the placket, right and left fronts).  All three pattern pieces must be cut out separately.  

Start with the placket.  The dominant stripe of the fabric is placed along the centerline as shown above. 



Eventually the buttonholes will be placed down the center stripe.  



On the RIGHT side of the shirt the buttons will be placed on the dominant stripe that was chosen for the placket.  That way when the shirt is buttoned the center stripe of the placket is directly over the identical stripe on the right shirt front.  The button line is quite clearly marked on the pattern above.  





After folding and top stitching the right front, the buttons end up centered on the dominant stripe. 





The LEFT side of the shirt may require more thought.  Remember the goal is to get the dominant stripe of the placket “stacked” directly over the same stripe on the Left front.  

On my shirt the placket is attached to the L front with a 3/8″ seam.  The placket is 1.5 ” wide, therefore the center of the finished placket is 3/4″ in from the edge.  

The dominant stripe is placed 1 1/8″ ( 3/8″ + 3/4″) from the front edge of the Left front pattern piece as shown above.  




Now the stripes will march uninterrupted across the front of the shirt.  Yay! 



Sadly, it can’t all be matching nirvana. 

I can’t wrap my head around matching the sleeve plackets, so I deliberately placed them on the cross grain.  They would also be attractive placed on the bias.  Maybe next time! 



Here’s the back box pleat with its centered stripe.   When it comes to shirts, it’s all about the little details.  They can be fun or they can make me want to scream.  This is my third version of this shirt and I learn something each time.  Mostly, I try to make things as easy as possible for myself.  I  concentrate most of my efforts in cutting out the pieces.  For example I set the stripe of the back yoke well in from the seam.  This helps preserve the effect that it’s sewn straight (which it probably isn’t!)  If a stripe had ended up on the seam, all my cutting and sewing imperfections would be magnified.   I also did the same thing with the collar and cuffs.  


I hope this has been helpful.  Next time I’ll show the finished product.  


8 thoughts on “The spring-y buttondown — stripe engineering

  1. Beautiful, just beautiful!…your explanations are so clear and detail so expertly completed, your projects are the example for my efforts when I sew for my grown son.

    Thank you for continuing to share your projects!

    Like

  2. Clever idea about cutting at a generous distance from straight lines in the design. I've just cut out a shirt in a floral, for a four year old boy. It's my first time sewing plackets. I think your horizontal placement is quite nice.

    Like

  3. You are so smart! This looks awesome, and I am very impressed with the thought you put into the stripe placement—plus it makes the buttons totally easier to place properly afterwards!

    I'm also terribly late commenting… I have this habit of reading blog posts on the iPad and starring things to comment later, and then I forget…

    Like

  4. Great work. The shirt looks awesome. I recently took up sewing myself and have been working on a few shirts. I had the same issues with matching the stripes. I decided to use a split yoke and had the stripes on both sides oriented parallel to the yoke/front seam. This ends up making a chevron pattern along to the yoke, but eliminates the issue of the stripes being visibly slanted on the yoke at the yoke/front seam, as well as hide any seam problems on the yoke/back seam.

    I will have to take your tip on lining up the front band stripes, mine don't look too hot because the seam in right on a stripe…

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.